REAR DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

    2. Connect the connector.

  2. INSTALL REAR SEAT SIDE GARNISH

    Click here

  3. INSTALL REAR DOOR SCUFF PLATE

    Click here

  4. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

    Click here

  5. INSTALL REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

    Click here

  6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for Fixed Seat Type)

    Click here

  7. INSTALL REAR SIDE SEATBACK ASSEMBLY (for Fold Down Seat Type)

    Tech Tips

    Use the same procedure as for the RH side.

    Click here

  8. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  9. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  10. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  11. INSTALL BATTERY SERVICE HOLE COVER LH (w/ Rear Seat Side Airbag)

    Click here

  12. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    Click here