REAR DOOR COURTESY SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PRECAUTION (w/ Rear Seat Side Airbag)

   CAUTION:
   
   

   • Be sure to read Precaution thoroughly before servicing.

     Click here

   • If a rear seat airbag assembly has deployed, replace the rear seat airbag assembly, bench type rear seatback cover and bench type rear seatback pad with the necessary parts in accordance with the extent of the collision damage.

   Note:

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

   Click here

2. Click here

   REMOVE BATTERY SERVICE HOLE COVER LH (w/ Rear Seat Side Airbag)

   Click here

3. Click here

   DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. Click here

   REMOVE REAR SEAT CUSHION ASSEMBLY

   Click here

5. Click here

   REMOVE REAR SEAT CUSHION LOCK HOOK

   Click here

6. Click here

   REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

   Click here

7. Click here

   REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (for Fixed Seat Type)

   Click here

8. Click here

   REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

   Click here

9. Click here

   REMOVE REAR SIDE SEATBACK ASSEMBLY (for Fold Down Seat Type)

   Tip:

   Use the same procedure as for the RH side.

   Click here

10. Click here

    REMOVE REAR DOOR SCUFF PLATE

    Click here

11. Click here

    REMOVE REAR SEAT SIDE GARNISH

    Click here

12. Click here

    REMOVE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY

    
    

    1. Disconnect the connector.

    2. 

       Using a T30 "TORX" socket wrench, remove the screw and rear door courtesy light switch assembly.