FRONT DOOR COURTESY SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.

      Torque:
      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

    2. Connect the connector.

  2. INSTALL LOWER CENTER PILLAR GARNISH

    Click here

  3. INSTALL REAR DOOR SCUFF PLATE

    Click here

  4. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  5. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  6. INSTALL FRONT DOOR SCUFF PLATE

    Click here