ENGINE HOOD COURTESY SWITCH INSPECTION

PROCEDURE


  1. INSPECT ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY)


    1. Measure the resistance according to the value(s) in the table below.

      A011O7SC01
      *A for LHD *B for RHD
      *a Open *b Lock
      *c

      Component without harness connected

      (Engine Hood Courtesy Switch (Hood Lock Assembly))

      		 - -
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Open 10 kΩ or higher
      Locked Below 1 Ω

      If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly).