ENTRY AND START SYSTEM(for Start Function) OPERATION CHECK

OPERATION DESCRIPTION

1. Push-button start function:

   
   

   1. When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal is depressed, the hybrid control system is started by pressing the power switch.

   2. When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal is not depressed, the power source mode is changed by pressing the power switch. The power source mode changes in the following order every time the power switch is pressed: off → on (ACC) → on (IG) → off.

   3. 

      *a	"ACCESSORY" Display

      After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the power switch is off, if the power switch is pressed while not depressing the brake pedal, the power source mode changes to on (ACC) and "ACCESSORY" is displayed on the multi-information display.

   4. 

      *A	for F SPORT Models
      *B	except F SPORT Models
      *a	"IGNITION ON" Display

      After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the power switch is off, if the power switch is pressed 2 times without depressing the brake pedal, the power source mode changes to on (IG) and "IGNITION ON" is displayed on the multi-information display.

   5. 

      *A	for F SPORT Models (Movable meter ring not activated)
      *B	for F SPORT Models (Movable meter ring activated)
      *C	except F SPORT Models
      *a	Key Indicator Display

      After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the power switch is off, if the brake pedal is depressed while the shift lever is in P, the key indicator is displayed on the multi-information display.

   6. The hybrid control system will start if the power switch is pressed when the key indicator is displayed.

2. Changing the power source mode when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion:

   
   

   1. Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.

   2. While depressing the brake pedal and facing the logo side of the electrical key transmitter sub-assembly towards the power switch, hold the electrical key transmitter sub-assembly near the power switch.

   3. 

      *A	for F SPORT Models
      *B	except F SPORT Models
      *a	"IGNITION ON" Display

      A buzzer in the combination meter assembly will sound and the power source mode changes to on (IG) and "IGNITION ON" is displayed on the multi-information display.

   4. Pressing the power switch without depressing the brake pedal turns the power source mode from on (IG) to off.

3. Starting the hybrid control system when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion:

   
   

   1. Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.

   2. While depressing the brake pedal with the shift lever in P and facing the logo side of the electrical key transmitter sub-assembly towards the power switch, hold the electrical key transmitter sub-assembly near the power switch.

   3. 

      *A	for F SPORT Models (Movable meter ring not activated)
      *B	for F SPORT Models (Movable meter ring activated)
      *C	except F SPORT Models
      *a	Key Indicator Display

      A buzzer in the combination meter assembly will sound, the power source mode changes to on (IG) and the key indicator will be displayed on the multi-information display.

   4. Press the power switch with the brake pedal depressed to start the hybrid control system.

CHECK PUSH-BUTTON START FUNCTION

1. Check the push-button start function:

   
   
   1. 

      *A	for F SPORT Models (Movable meter ring not activated)
      *B	for F SPORT Models (Movable meter ring activated)
      *C	except F SPORT Models
      *a	Key Indicator Display

      Get into the vehicle while carrying the electrical key transmitter sub-assembly with the power switch off. With the shift lever in P, check that the key indicator is displayed when the brake pedal is depressed. Check that the hybrid control system starts when the power switch is pressed after the key indicator is displayed on the multi-information display.

   2. While the brake pedal is released and the electrical key transmitter sub-assembly is being carried, check that the power source mode changes in the following order when the power switch is pressed: off → on (ACC) → on (IG) → off.

      Tech Tips

      When the power switch is pressed with the power switch on (IG) and the shift lever not in P, the power source mode does not change to off, but changes to on (ACC).

   3. With the shift lever in P, check that the steering lock operates when a door is opened.

      Tech Tips

      When the power switch is pressed after the vehicle is stopped, the hybrid control system stops and all the power turns off. However, if the shift lever is not in P when the power switch is pressed with the vehicle stopped, the power source mode does not change to off, but changes to on (ACC).

   4. 

      *a	Inspection Point

      Check the push-button start function operation range for the front side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the hybrid control system can be started.

      Note

      Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter sub-assembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.

      Tech Tips

      
      

      • Communication may not be possible if the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the shift lever.

      • Perform this inspection for both inspection points.

   5. 

      *a	Inspection Point

      Check the push-button start function operation range for the rear side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the hybrid control system can be started.

      Note

      Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter sub-assembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.

      Tech Tips

      
      

      • Communication may not be possible if the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat.

      • Perform this inspection for both inspection points.

CHECK TRANSMITTER BATTERY SAVING FUNCTION

1. Check the transmitter battery saving mode function:

   
   

   1. Press the unlock switch of the electrical key transmitter sub-assembly twice while pressing the lock switch and check that the electrical key transmitter sub-assembly LED blinks 4 times and enters transmitter battery saving mode.

   2. Check that the entry and start system (for Start Function) does not operate while in transmitter battery saving mode.

      Tech Tips

      To cancel transmitter battery saving mode, press a switch of the electrical key transmitter sub-assembly.

CHECK POWER SOURCE MODE CHANGING FUNCTION

1. Check the power switch.

   
   

   1. Check that the power source mode changes according to the chart below.

      Shift Position	Brake Pedal	Power Source Mode when Power Switch Pressed
      P	Released	Off → on (ACC) → on (IG) → off
      P	Released	On (READY) → off
      P	Released	On (ACC)* → on (IG)
      P	Depressed	Off → on (READY)
      P	Depressed	On (ACC) → on (READY)
      P	Depressed	On (IG) → on (READY)
      P	Depressed	On (READY) → off
      P	Depressed	On (ACC)* → on (READY)
      Not P	Released	Off → on (ACC) → on (IG) (after power source mode changes to on (IG), power source mode changes between on (IG) and on (ACC) every time power switch is pressed)
      Not P	Released	On (READY) → on (ACC)
      Not P	Depressed	Off → on (IG)
      Not P	Depressed	On (ACC) → on (IG)
      Not P	Depressed	On (READY) → on (ACC)

      Tech Tips

      *: This situation is only applicable when the power source mode has changed from on (IG) to on (ACC). (Excluding an emergency stop by pressing the power switch 3 times quickly or pressing and holding the power switch for 2 seconds or more.)

CHECK POWER SOURCE MODE INDICATION