PUSH-BUTTON START DIAGNOSIS SYSTEM


  1. DESCRIPTION


    1. Push-button start data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform repairs.

  2. CHECK DLC3


    1. Check the DLC3.

      Click here

  3. INSPECT AUXILIARY BATTERY VOLTAGE


    1. Measure the auxiliary battery voltage with the power switch off.

      If the voltage is below 11 V, recharge or replace the auxiliary battery.