WIRELESS DOOR LOCK CONTROL SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body, Entry&Start or Power Source Control / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Power switch on (ACC) signal OFF or ON

      OFF: Power switch off

      ON: Power switch on (ACC)

      		 -
      IG SW Power switch on (IG) signal OFF or ON

      OFF: Power switch off or on (ACC)

      ON: Power switch on (IG)

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal OFF or ON

      OFF: Rear door RH closed

      ON: Rear door RH open

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal OFF or ON

      OFF: Rear door LH closed

      ON: Rear door LH open

      		 -
      FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH signal OFF or ON

      OFF: Front door RH closed

      ON: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH signal OFF or ON

      OFF: Front door LH closed

      ON: Front door LH open

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal OFF or ON

      OFF: Rear door RH locked

      ON: Rear door RH unlocked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch signal OFF or ON

      OFF: Rear door LH locked

      ON: Rear door LH unlocked

      		 -
      Luggage Courtesy SW Luggage compartment door lock courtesy light switch signal OFF or ON

      OFF: Luggage compartment door lock courtesy light switch off

      ON: Luggage compartment door lock courtesy light switch on

      		 -
      Wireless Control Wireless door lock control function OFF or ON Customization status displayed -
      Hazard Answer Back Hazard answer-back of wireless function OFF or ON Customization status displayed -
      Open Door Warning Open door warning*1 OFF or ON Customization status displayed -
      Unlock 2 Operation 2 times operation of wireless unlock*2 OFF or ON Customization status displayed -
      Panic Function Panic function*3 OFF or ON Customization status displayed -
      Auto Lock Time Automatic lock time 30 s, 60 s or 120 s Customization status displayed -
      Wirelss Buzzer Resp Buzzer answer-back of wireless*4 OFF or ON Customization status displayed -
      P/W Wireless Ope Buzz Buzzer sounds of wireless power window*5 OFF or ON Customization status displayed -
      Wireless Buzzer Vol Wireless door lock buzzer volume*4 Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Customization status displayed -
      Trunk Lid Operation Opening the luggage compartment door by the electrical key transmitter sub-assembly 1 tim ON, 2 tim ON, Long1, Long2 or Prohibit Customization status displayed -

      • *1: w/ Open Door Warning Function

      • *2: w/ Wireless Unlock 2 Operation Function

      • *3: w/ Panic Function

      • *4: w/ Wireless Door Lock Buzzer Answer-back Function

      • *5: w/ Power Window Down Function


      Body Electrical > Entry&Start > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      # Codes Number of DTCs 0 to 255 Number of stored DTCs -

      Body Electrical > Power Source Control > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Power Supply Condition Power supply state All OFF, ACC ON, IG ON or ST ON

      All OFF: Power switch off (ACC and IG)

      ACC ON: Power switch on (ACC)

      IG ON: Power switch on (IG)

      ST ON: Sending hybrid control system start request signal

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test

      -
      Tester Display Measurement Item Control Range Diagnostic Note
      Door Lock Door lock motor OFF/Unlock/Lock -
      Trunk and Back-Door Open Luggage door lock motor OFF/ON -
      Wireless Buzzer Wireless door lock buzzer OFF/ON -