DOOR CONTROL RECEIVER(w/o Tire Pressure Warning System) REMOVAL

PROCEDURE

1. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

2. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)

   Click here

3. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

4. REMOVE REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

5. REMOVE REAR SEAT SIDE GARNISH LH

   Click here

6. REMOVE REAR SEAT SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side.

7. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

8. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

9. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for Fold Down Seat Type)

   Click here

10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

    Click here

11. REMOVE REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)

    Click here

12. REMOVE NO. 2 ROOM PARTITION COVER (for Fold Down Seat Type)

    Click here

13. REMOVE NO. 1 ROOM PARTITION COVER (for Fold Down Seat Type)

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

14. REMOVE NO. 3 ROOM PARTITION COVER (for Fold Down Seat Type)

    Click here

15. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

16. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

17. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Fixed Seat Type)

    Click here

18. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

19. REMOVE CENTER STOP LIGHT ASSEMBLY WITH COVER (w/o Rear Sunshade)

    Click here

20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    Click here

21. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

22. REMOVE DOOR CONTROL RECEIVER

    
    

    1. 

       Disconnect the connector.

    2. Remove the bolt.

    3. Disengage the guide to remove the door control receiver.