DOOR CONTROL RECEIVER(w/ Tire Pressure Warning System) INSTALLATION

PROCEDURE

1. INSTALL DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY

   
   

   1. Connect the connector to the door control and tire pressure monitoring system receiver assembly.

   2. Engage the 2 hooks to temporarily install the door control and tire pressure monitoring system receiver assembly.

   3. Install the door control and tire pressure monitoring system receiver assembly with the bolt.

      Torque:

      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH

   Click here

3. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

4. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

5. INSTALL REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

   Tech Tips

   Use the same procedure as for the RH side.

   Click here

6. INSTALL REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)

   Click here

7. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

   Click here

8. INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. INSTALL BATTERY SERVICE HOLE COVER LH (w/ Rear Seat Side Airbag)

    Click here

11. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    Click here

12. REGISTER TRANSMITTER ID

    Click here

13. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

14. PERFORM INITIALIZATION

    Click here