AUXILIARY BATTERY REMOVAL

CAUTION / NOTICE / HINT

Note

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

Click here

PROCEDURE


  1. REMOVE BATTERY SERVICE HOLE COVER LH


    1. A0020VM

      Disengage the 7 claws and 7 guides to remove the battery service hole cover LH.

  2. REMOVE LUGGAGE TRIM SERVICE HOLE COVER


    1. A00231X

      Disengage the 4 claws to remove the luggage trim service hole cover.

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


    1. Loosen the nut, and disconnect the cable from the negative (-) auxiliary battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Click here

  4. REMOVE TIRE REPAIR SEAL


    1. A0021ZZ

      Disengage the 2 claws to disconnect the tool box band assembly.

    2. A0021BP

      Disengage the 2 guides and remove the tire repair seal from the auxiliary battery.

  5. REMOVE AUXILIARY BATTERY


    1. A0020J3

      Disengage the 2 claws to open the auxiliary battery terminal cap.

    2. Loosen the nut and disconnect the cable from the positive (+) auxiliary battery terminal.

    3. A0021ZP

      Remove the nut and battery clamp sub-assembly from the auxiliary battery.

    4. A00219B

      Remove the bolt and battery hold down clamp sub-assembly from the auxiliary battery.

    5. A0022C1

      Disconnect the auxiliary battery hose.

    6. Remove the auxiliary battery.