BLIND SPOT MONITOR MAIN SWITCH REMOVAL

PROCEDURE

1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

2. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

4. REMOVE BLIND SPOT MONITOR MAIN SWITCH ASSEMBLY (WARNING CANCELING SWITCH ASSEMBLY)

   
   

   1. 

      Disengage the 2 claws and remove the blind spot monitor main switch assembly (warning canceling switch assembly).