BLIND SPOT MONITOR SENSOR REMOVAL

PROCEDURE


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. A0022UJ

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor LH.

      Note

      Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH


    1. A00237P

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor RH.

      Note

      Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.