BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB7

DTC Code DTC Name
C1AB7 Blind Spot Monitor Slave Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AB7 Blind Spot Monitor Slave Module The blind spot monitor sensor RH (slave) detects an internal malfunction Blind spot monitor sensor RH

CAUTION / NOTICE / HINT

Note

When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.

PROCEDURE


  1. CHECK DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > Blind Spot Monitor Slave > Clear DTCs

    2. Recheck for DTCs and check if the same DTC is output again.


      Body Electrical > Blind Spot Monitor Slave > Trouble Codes
      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    REPLACE BLIND SPOT MONITOR SENSOR RH Click here