PARKING ASSIST MONITOR SYSTEM(w/ Parallel Parking Assist Function) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.


      Body Electrical > Navigation System > Trouble Codes
    5. Check for DTCs.

      Click here

      Note

      The radio receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

      System Proceed to
      Navigation System*1

      Click here

      Audio and Visual System (w/ Parallel Parking Assist Function)*2

      Click here

      Telematics System

      Click here


      • *1: w/ Navigation System

      • *2: w/o Navigation System

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Navigation System / Trouble Codes.


      Body Electrical > Navigation System > Clear DTCs
    5. Clear the DTCs.