REMOTE TOUCH(for Multi-Media Module Receiver Type) REASSEMBLY

PROCEDURE


  1. INSTALL REMOTE OPERATION BOARD


    1. A011N57

      Connect the connector.

    2. A011NQ4

      Install the remote operation board to the remote operation switch with the 4 screws.

  2. INSTALL INTEGRATION PANEL SUB-ASSEMBLY


    1. A011NJ6

      Engage the 2 claws.

    2. Install the integration panel sub-assembly with the 2 screws.

  3. INSTALL COVER ASSEMBLY


    1. A011PGU

      Engage the 2 clips to install the cover assembly as shown in the illustration.

  4. INSTALL SWITCH KNOB


    1. A011OBK

      Install the switch knob as shown in the illustration.

  5. INSTALL INSTRUMENT PANEL CUP HOLDER

    Click here