REMOTE TOUCH(for Multi-Media Module Receiver Type) DISASSEMBLY

PROCEDURE


  1. REMOVE INSTRUMENT PANEL CUP HOLDER

    Click here

  2. REMOVE SWITCH KNOB


    1. A0020Q3

      Remove the switch knob as shown in the illustration.

  3. REMOVE REMOTE OPERATION BOARD


    1. A0021WM

      Remove the 2 screws.

    2. A0022NO

      Remove the 2 screws.

    3. A0021V3

      Disengage the clamp.

    4. Disconnect the connector and remove the remote operation board from the remote operation switch.

  4. REMOVE COVER ASSEMBLY


    1. A0022T6

      Remove the 6 screws.

    2. A0021WS

      Disengage the 4 claws and remove the cover assembly from the remote operation switch.