REMOTE TOUCH(for Multi-Media Module Receiver Type) DISASSEMBLY

PROCEDURE


  1. REMOVE INSTRUMENT PANEL CUP HOLDER

    Click here

  2. REMOVE SWITCH KNOB


    1. A011O99

      Remove the switch knob as shown in the illustration.

  3. REMOVE COVER ASSEMBLY


    1. A011MWZ

      Disengage the 2 clips and remove the cover assembly as shown in the illustration.

  4. REMOVE INTEGRATION PANEL SUB-ASSEMBLY


    1. A011NJ6

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the integration panel sub-assembly.

  5. REMOVE REMOTE OPERATION BOARD


    1. A011NQ4

      Remove the 4 screws.

    2. A011N57

      Disconnect the connector and remove the remote operation board from the remote operation switch.