NAVIGATION SYSTEM No Feedback Force Provided by Knob of Remote Touch

DESCRIPTION

When the remote touch switch knob is operated, the built-in 2-axis motors are controlled. The motors are used to provide feedback force for the knob according to the pointer operation displayed on the multi-display assembly.

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click here

PROCEDURE


  1. REMOTE TOUCH SELF CHECK (REMOTE TOUCH SWITCH KNOB FEEDBACK FORCE GENERATION CHECK)


    1. A01MRVDC04
      *a Switch Knob
      *b Control Direction
      *c Feedback Force

      Check the remote touch switch knob feedback force generated.


      1. Move the remote touch switch knob up, down, right and left to check that feedback force is generated.

        OK
        Feedback force is generated.

        Tech Tips

        When the power switch is turned on (ACC), feedback force is generated. When the power switch is turned off, feedback force is not generated, and the remote touch switch knob will move freely.

      Result
      Proceed to
      OK
      NG

    NG

    REPLACE REMOTE OPERATION BOARD Click here

    OK

  2. REMOTE TOUCH SELF CHECK (FEEDBACK FORCE FUNCTION)


    1. Check feedback force function


      1. Move the pointer on the screen by operating the remote touch switch knob and check that the feedback force of the knob changes according to the screen being displayed and the pointer position.

        Tech Tips

        Refer to Remote Touch Outline for further information on remote touch switch knob feedback force generated according to the screen being displayed and the pointer position.

        Click here

        Result
        Result Proceed to
        Feedback force of the remote touch switch knob does not change according to the screen being displayed and the pointer position. A
        Feedback force of the remote touch switch knob changes according to the screen being displayed and the pointer position. B

    A

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    B

    USE SIMULATION METHOD TO CHECK Click here