MULTI-DISPLAY REASSEMBLY

CAUTION / NOTICE / HINT

Note


  • Do not damage the LCD panel.

  • If there are any fingerprints or foreign matter on the display portion of the LCD panel, wipe them off with a soft cloth.

  • Do not separate the rear cover from the LCD panel.

PROCEDURE


  1. INSTALL FRONT ESCUTCHEON


    1. Engage the 3 claws and 2 guides as shown in the illustration.

      B003YD0

    2. Engage the 5 guides and 10 claws as shown in the illustration.

      A0020DY
    3. B003YFSN01

      Check that there is no clearance between the front escutcheon and rear escutcheon as shown in the illustration.

      Standard Measurement
      Area Measurement
      A 0 mm (0 in.)
      B 0 mm (0 in.)
    4. B003Y82

      Install the front escutcheon and rear escutcheon with the 6 screws.

    5. Remove the release paper from a new insulator.

      Tech Tips

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    6. B003Y67C01
      *a Standard Measurement

      Install the insulator as shown in the illustration.

      Standard Measurement
      Area Measurement
      A 0 to 2.0 mm (0 to 0.0787 in.)
      B 0 to 2.0 mm (0 to 0.0787 in.)