NAVIGATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note


    • After the power switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal.

    • When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the terminal is reconnected.

      System Name See Procedure
      Lane Departure Alert System (w/ Steering Control)

      Click here

      Parking Assist Monitor System (w/ Parallel Parking Assist Function)
      Parking Assist Monitor System (w/o Parallel Parking Assist Function)
      Pre-collision System
      Air Conditioning System

  2. PRECAUTION FOR NAVIGATION SYSTEM


    1. If replacing any of the following parts, refer to Initialization of Repair Instruction.

      Click here


      • Radio receiver assembly

      • Telematics transceiver*


      • *: w/ Telematics Transceiver

  3. PRECAUTIONS FOR SD CARD


    1. The navigation system uses an SD card containing data such as map data.

    2. Precaution for removing the SD card

      Note


      • The SD card contains map data and various programs for the navigation system.

        Without the SD card inserted, the navigation system will not operate normally. Therefore, remove the SD card only when necessary, such as when updating the map data.

      • After removing the SD card, do not insert any other object into the SD card slot.

      • When inserting the SD card into the SD card slot, make sure that the SD card is free of foreign matter.

      • After inserting the SD card, make sure that it is securely inserted into the SD card slot.


      1. Before removing the SD card, make sure that the power switch is turned off.

    3. Precaution for handling the SD card

      Note


      • A0021KM

        Do not touch the terminals with your hand or a metal object.

      • If a strong force is applied to the SD card, it may be damaged.

      • Do not leave the removed SD card in any of the following environments. If the SD card is affected adversely, it may result in a malfunction in the navigation system.


        • Places where static electricity or electronic noise is generated.

        • Places which are hot or humid.

        • Places where the SD card may be exposed to direct sunlight.

        • Places where condensation occurs.

        • Places which are prone to corrosion.

      • Do not use the SD card if the label has peeled off or someone has put a sticker or other label on the SD card.