Click here

NAVIGATION SYSTEM Disc cannot be Ejected

Click here
Click here
DTC Code DTC Name
  Disc cannot be Ejected
Click here

CAUTION / NOTICE / HINT

Note:

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.

Click here

Click here

PROCEDURE


  1. Click here

    CHECK OPERATION


    1. Press the disc eject switch of the radio receiver assembly for 5 seconds or more and check that the disc is ejected.

      OK
      Disc is ejected.
      Result
      Proceed to
      OK
      NG

  2. Click here

    REPLACE DISC AND RECHECK


    1. Replace the disc with a known good one and check that the malfunction disappears.

      OK
      Disc is ejected.
      Result
      Proceed to
      OK
      NG

    • OK

      END (DISC WAS FAULTY)

    • NG

      REPLACE RADIO RECEIVER ASSEMBLYClick here