ASC SPEAKER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX

   
   

   1. Install the No. 1 speaker assembly with box with the 2 nuts.

   2. Engage the clamp.

   3. Connect the connector.

2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

   Click here

3. INSTALL CONSOLE PANEL SUB-ASSEMBLY

   Click here

4. INSTALL FRONT PANEL GARNISH RH

   Click here

5. INSTALL FRONT PANEL GARNISH LH

   Click here

6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

10. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here