REAR PACKAGE TRAY SPEAKER INSPECTION

PROCEDURE


  1. INSPECT REAR NO. 2 SPEAKER ASSEMBLY


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A0020XPC03
      *a

      Component without harness connected

      (Rear No. 2 Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      except 15 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 2.0 to 3.0 Ω
      for 15 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 5.0 to 7.0 Ω

      If the result is not as specified, replace the speaker.

  2. INSPECT REAR NO. 3 SPEAKER ASSEMBLY (for 15 Speakers)


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A01CZAWC01
      *a

      Component without harness connected

      (Rear No. 3 Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 7.0 to 10.6 Ω

      If the result is not as specified, replace the speaker.