Click here

FRONT DOOR SPEAKER INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. A0020XPC03
      *a

      Component without harness connected

      (Front No. 1 Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      Table 1. except 15 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 3.2 to 4.8 Ω
      Table 2. for 15 Speakers
      Tester Connection Condition Specified Condition
      1 - 2 Always 4.3 to 6.3 Ω

      If the result is not as specified, replace the speaker.