RADIO RECEIVER INSTALLATION

PROCEDURE

1. Click here

   INSTALL RADIO RECEIVER ASSEMBLY

2. Click here

   INSTALL NO. 1 RADIO BRACKET

   
   

   1. Install the No. 1 radio bracket with the 3 screws.

3. Click here

   INSTALL NO. 2 RADIO BRACKET

   
   

   1. Install the No. 2 radio bracket with the 3 screws.

4. Click here

   INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

   
   

   1. Connect each connector.

   2. Engage the 4 clips to temporarily install the radio receiver assembly with bracket.

   3. Install the radio receiver assembly with bracket with the 4 bolts.

5. Click here

   INSTALL CONSOLE PANEL SUB-ASSEMBLY

   Click here

6. Click here

   INSTALL FRONT PANEL GARNISH RH

   Click here

7. Click here

   INSTALL FRONT PANEL GARNISH LH

   Click here

8. Click here

   INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

9. Click here

   INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

10. Click here

    INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

12. Click here

    INSTALL BATTERY SERVICE HOLE COVER LH

    Click here