ASC SPEAKER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work.

    Click here

  2. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  7. REMOVE FRONT PANEL GARNISH LH

    Click here

  8. REMOVE FRONT PANEL GARNISH RH

    Click here

  9. REMOVE CONSOLE PANEL SUB-ASSEMBLY

    Click here

  10. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  11. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX


    1. A0020PF

      Disconnect the connector.

    2. Disengage the clamp.

    3. A0021CF

      Remove the 2 nuts and No. 1 speaker assembly with box.