ASC SYSTEM FREEZE FRAME DATA


  1. FREEZE FRAME DATA


    1. Whenever an ASC system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data.

  2. CHECK FREEZE FRAME DATA


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / ASC / Trouble Codes.

    5. According to the GTS display, select a DTC that stored freeze frame data.

    6. Read the freeze frame data recorded when the DTC was stored.


      Body Electrical > ASC
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Sound State Simulated engine sound output status Stopping or Sounding

      Stopping: Simulated engine sound stopped

      Sounding: Simulated engine sound being output

      		 -
      Mute Mute setting OFF or ON

      OFF: Mute off

      ON: Mute on

      		 -
      Gear Position (D Range) Gear position information 1st, 2nd, 3rd, 4th, 5th, 6th, 7th or 8th Actual gear position -
      Suppositional Engine Speed (Target Value) Calculated engine speed in the stereo component equalizer assembly

      Min.: 0 rpm

      Max.: 7000 rpm

      		 Changes according to driving conditions (accelerator pedal opening angle, vehicle speed, etc.) -
      Volume SW Vehicle sound switch on/off status OFF or ON

      OFF: Vehicle sound switch off

      ON: Vehicle sound switch on

      		 -
      Speaker Disconnection Inspection State of wire harness between stereo component equalizer assembly and No. 1 speaker assembly with box OFF or Inspecting

      OFF: Open not detected

      Inspecting: Open detected

      		 -
      Volume Switch Voltage The VSLI terminal voltage to the CPU of the stereo component equalizer assembly

      Min.: 0 V

      Max.: 5 V

      		 Changes according to vehicle sound switch volume setting -
      Pseudo Engine Revolution (HV ECU) Actual engine speed

      Min.: 0 rpm

      Max.: 12800 rpm

      		 Actual engine speed -
      Vehicle Speed Maximum wheel speed sensor reading

      Min.: 0 km/h

      Max.: 327.67 km/h

      		 Actual vehicle speed -
      Accelerator Position Accelerator pedal opening angle

      Min.: 0 %

      Max.: 111.0 %

      		 Actual accelerator pedal opening angle -
      Shift SW Status (P Range) Park/Neutral position switch status OFF or ON

      OFF: Shift lever in any position other than P

      ON: Shift lever in P

      		 -
      Shift SW Status (R Range) Shift lever position (R) OFF or ON

      OFF: Shift lever in any position other than R

      ON: Shift lever in R

      		 -
      Shift SW Status (D Range) Shift lever position (D) OFF or ON

      OFF: Shift lever in any position other than D

      ON: Shift lever in D

      		 -
      Shift SW Status (N Range) Shift lever position (N) OFF or ON

      OFF: Shift lever in any position other than N

      ON: Shift lever in N

      		 -
      Gear Position (Sports Mode) Gear position information with shift lever in S Not Sports Mode, 1st, 2nd, 3rd, 4th, 5th or 6th

      Not Sports Mode: Shift lever in any position other than S

      1st: S1 gear range selected

      2nd: S2 gear range selected

      3rd: S3 gear range selected

      4th: S4 gear range selected

      5th: S5 gear range selected

      6th: S6 gear range selected

      		 -
      Drive Mode Status Drive mode status Normal, Power, Sports, Sports+, ECO or Customize

      Normal: NORNAL mode selected

      Power: SPORTS S mode selected

      Sport: SPORTS S mode selected

      Sport+: SPORTS S+ mode selected

      ECO: ECO mode selected

      Customize: CUSTOMIZE mode selected

      		 -
      Integrated Sport Mode Indicator Drive mode (SPORT) status OFF or Lighting

      OFF: Drive mode other than SPORT S, SPORT S+ or CUSTOMIZE (POWER)* mode selected

      Lighting: SPORT S, SPORT S+ or CUSTOMIZE (POWER)* mode selected

      		 -
      Sport Mode Indicator S position switch status OFF or Lighting

      OFF: Shift lever in any position other than S

      Lighting: Shift lever in S

      		 -
      SNOW Mode Indicator SNOW mode indicator illumination status OFF or Lighting

      OFF: SNOW mode indicator not illuminated

      Lighting: SNOW mode indicator illuminate

      		 -
      ECO Mode Indicator ECO mode indicator illumination status OFF or Lighting

      OFF: ECO mode indicator not illuminated

      Lighting: ECO mode indicator illuminate

      		 -
      Powertrain Customize Status Powertrain Customize Status POWER, ECO or NORMAL

      POWER: SPORT S mode selected

      ECO: ECO mode selected

      NORMAL: NORNAL mode selected

      		 -
      Engine Mode Engine operating status Stopped, Move to Stopping, Starting or Running

      Stopped: Engine stopped

      Move to Stopping: Engine attempting to stop

      Starting: Engine attempting to start

      Running: Engine running

      		 -
      EV Mode EV mode indicator illumination status OFF or Lighting

      OFF: EV mode indicator not illuminated

      Lighting: EV mode indicator illuminate

      		 -
      Integrated Sport Mode Status Drive mode (SPORT S or SPORT S+) status Not Sport, PWR & Chassis, Chassis or PWR

      Not Sport: Drive mode other than SPORT S, SPORT S+ or CUSTOMIZE (POWER)* mode selected

      PWR & Chassis: SPORT S or SPORT S+ mode selected

      Chassis: SPORT S or SPORT S+ mode selected

      PWR: SPORT S, SPORT S+ or CUSTOMIZE (POWER)* mode selected

      		 -
      Number of DTC Number of trouble codes

      Min.: 0

      Max.: 255

      		 Number of DTCs displayed -

      • *: w/ AVS System

  3. CLEAR FREEZE FRAME DATA

    Note

    Clearing the DTCs will also clear the freeze frame data.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Clear DTCs and freeze frame data.

      Click here


      Body Electrical > ASC > Clear DTCs