AUDIO AND VISUAL SYSTEM(w/ Parking Assist Monitor System) Cellular Phone Inspection

CAUTION / NOTICE / HINT

Tech Tips

If the operation of a cellular phone or the radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

PROCEDURE


  1. CHECK USAGE CONDITION


    1. Check that the vehicle and cellular phone meet the following conditions:

      Note

      If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.


      • The cellular phone is "Bluetooth" compatible.

        Click here

      • The cellular phone is registered as a hands-free device.

      • "Bluetooth" setting of the cellular phone is on.

      • The "Wi-Fi" setting of the radio receiver assembly and cellular phone is off.

      • Operating system and software of the cellular phone are the latest versions.

      • There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.

    2. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END

    B

  2. RESTART CELLULAR PHONE


    1. Restart the cellular phone.

    2. Turn the power switch off.

    3. Turn the power switch on (ACC).

    4. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END

    B

  3. CHECK OPERATION


    1. Check if the in-vehicle device can be recognized by the cellular phone.

      Result
      Result Proceed to
      In-vehicle device can be recognized A
      In-vehicle device cannot be recognized B

    B

    GO TO STEP 5 Click here

    A

  4. REGISTER AGAIN


    1. Clear all "Bluetooth" devices registered to the cellular phone and radio receiver assembly.

    2. Register the cellular phone again.

    3. Connect the cellular phone to the in-vehicle device and check that it is connected correctly.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END

    B

  5. CHECK USING ANOTHER VEHICLE


    1. Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

      Tech Tips


      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      Result
      Result Proceed to
      The cellular phone is connected correctly A
      The cellular phone is not connected correctly B

    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    B

  6. CHECK USING ANOTHER CELLULAR PHONE


    1. Check if the system functions normally using another "Bluetooth" compatible cellular phone.

      Tech Tips


      • Make sure to obtain the customer's permission to perform this procedure.

      • After the inspection, clear the registered information and usage history acquired during the inspection.

      Result
      Result Proceed to
      The cellular phone is connected correctly. A
      The cellular phone is not connected correctly. B

    A

    END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

    B

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here