AUDIO AND VISUAL SYSTEM(w/ Parallel Parking Assist Function) Switch Operation of Remote Touch not Accepted

CAUTION / NOTICE / HINT

PROCEDURE

1. START DIAGNOSTIC MODE

   
   

   1. Enter diagnostic mode and check if the "Service Menu" screen is displayed.

      Click here

      OK
      The "Service Menu" is displayed.

      Result
      Proceed to OK NG

   
   

   NG

   REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK) Click here

   OK

2. CHECK PANEL SWITCH (OPERATION CHECK)

   
   

   1. 

      Enter the "Panel&Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check.

      Click here

   2. Operate the abnormal switch and check if the switch status is correctly displayed.

      OK
      The switch status is correctly displayed as operated.

      Result
      Proceed to OK NG

   
   

   OK

   REPLACE RADIO RECEIVER ASSEMBLY Click here

   NG

3. REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK)

   
   

   1. Activate self check mode.

      Click here

   2. 

      *a	Switch Illumination
      *b	Switch Knob

      Check switch operation.

      
      

      1. Move the remote touch switch knob to the lower left.

      2. Check that the "MENU", "HOME" and back switches illuminate when each switch on the remote touch is pressed.

         Result
         Result Proceed to Self check mode cannot be activated. A The "MENU", "HOME" and back switch does not illuminate when pressed. The "MENU", "HOME" and back switches illuminate when they are pressed. B

   
   

   B

   REPLACE RADIO RECEIVER ASSEMBLY Click here

   A

4. REPLACE REMOTE OPERATION SWITCH

   
   

   1. Replace the remote operation switch.

      Click here

   2. Check that each switch operation on the remote touch is accepted normally.

      OK
      Each switch operation is accepted normally.

      Result
      Proceed to OK NG

   
   

   OK

   END

   NG

   REPLACE REMOTE OPERATION BOARD Click here