AUDIO AND VISUAL SYSTEM(w/o Parallel Parking Assist Function), Diagnostic DTC:B15F8

DTC Code DTC Name
B15F8 D-Seat ECU Vehicle Information Reading/Writing Process Malfunction

DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the audio and visual system vehicle customization screen.

Tech Tips

The main body ECU (multiplex network body ECU) controls the front power seat control system (w/ Memory) related items that are customizable via the multi-display assembly screen.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15F8 D-Seat ECU Vehicle Information Reading/Writing Process Malfunction Main body ECU (multiplex network body ECU) vehicle setting processing error

  • CAN communication system

  • Front power seat control system (w/ Memory)

  • Main body ECU (multiplex network body ECU)

  • Radio receiver assembly

CAUTION / NOTICE / HINT

Note

Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Use the GTS to check if the CAN communication system is functioning normally.

      Click here

      OK
      CAN DTCs are not output.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

  2. CHECK FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)


    1. Check if the front power seat control system (w/ Memory) is malfunctioning.

      Click here

      Tech Tips

      Customization may not be possible depending on the malfunction in the front power seat control system (w/ Memory).

      OK
      No malfunctions are present in the front power seat control system (w/ Memory).
      Result
      Proceed to
      OK
      NG

    NG

    GO TO FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) Click here

    OK

  3. CHECK CUSTOMIZE ITEMS


    1. Display the "Vehicle Customization" screen.

    2. Make a note of the customizable items for each main body ECU (multiplex network body ECU).

      Tech Tips

      The items shown as customizable via the audio and visual system vehicle customization screen can also be changed using the GTS. In the following step, the GTS will be used.


      1. To match-up the items on the multi-display assembly with the items on the GTS, check the customize parameters list for the front power seat control system (w/ Memory) related items that can be customized via the multi-display assembly screen.

        Click here

    3. Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display assembly screen.

      OK
      The items available for customization via the multi-display assembly screen can be customized successfully using the GTS.
      Result
      Proceed to
      OK
      NG

    OK

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    NG

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here