STEERING HEATER SWITCH INSPECTION

PROCEDURE


  1. INSPECT STEERING HEATER SWITCH (REFRESHING SEAT SWITCH)


    1. B003YO4C05
      *a Component without harness connected (Steering Heater Switch (Refreshing Seat Switch))

      Remove the steering heater switch (refreshing seat switch).

      Click here

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (IG) - 5 (IN) Steering heater switch (refreshing seat switch) is pushed Below 200 Ω
      1 (IG) - 5 (IN) Steering heater switch (refreshing seat switch) is not pushed 10 kΩ or higher