HEATED STEERING WHEEL CONTROLLER(w/o Pre-collision System) INSTALLATION

PROCEDURE

1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY

   
   

   1. Connect the connector to the steering wheel heater control assembly.

   2. Engage the clamp.

   3. Install the steering wheel heater control assembly to the lower steering wheel boss cover with the 2 screws.

      Torque:

      0.8 N*m  { 8 kgf*cm, 7 in.*lbf }

   4. Connect the connector to the steering wheel heater control assembly.

2. INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here