TILT AND TELESCOPIC MANUAL SWITCH INSPECTION

PROCEDURE


  1. INSPECT TILT AND TELESCOPIC SWITCH


    1. A00237GC05
      *a

      Component without harness connected

      (Tilt and Telescopic Switch)

      Remove the tilt and telescopic switch.

      Click here

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (VC) - 3 (MSW) Tilt up 342 to 378 Ω
      Tilt down 1890.5 to 2089.5 Ω
      Telescopic contract 750.5 to 829.5 Ω
      Telescopic extend 152 to 168 Ω