STEERING PAD SWITCH(w/ Pre-collision System) INSTALLATION

PROCEDURE


  1. INSTALL STEERING PAD SWITCH ASSEMBLY


    1. A0022H3

      Engage the 2 claws and 2 pins to install the steering pad switch assembly to the steering wheel sub-assembly.

    2. Install the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }
    3. A0022X3

      Connect the connector to the spiral cable with sensor sub-assembly.

  2. INSTALL CRUISE CONTROL MAIN SWITCH

    Click here

  3. INSTALL HORN BUTTON ASSEMBLY

    Click here