STEERING PAD SWITCH REMOVAL

PROCEDURE


  1. REMOVE HORN BUTTON ASSEMBLY

    Click here

  2. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. A011MNA

      Disconnect the steering pad switch connector from the spiral cable with sensor sub-assembly.

    2. Disengage the steering pad switch connector clamp from the lower steering wheel boss cover.

    3. Disconnect the steering pad switch connector from the No. 1 switch wire.

    4. A011Q7O

      Remove the 2 screws.

    5. Disengage the 2 claws and 2 pins to remove the steering pad switch assembly from the steering wheel sub-assembly.