FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY

   
   

   1. Apply MP grease to the sliding parts of the fuel lid lock with motor assembly.

   2. Engage the claw to install the fuel lid lock with motor assembly.

   3. Engage the clamp.

   4. Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

3. INSTALL NO. 2 ROOM PARTITION COVER (for Fold Down Seat Type)

   Click here

4. INSTALL REAR SEAT SUB FLOOR PANEL (for Fold Down Seat Type)

   Click here

5. INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

6. INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type)

   Click here

7. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fixed Seat Type)

   Click here

9. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (for Fold Down Seat Type)

   Click here

10. INSTALL LUGGAGE COMPARTMENT TRIM BOX

    Click here

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here