LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH INSPECTION

PROCEDURE


  1. INSPECT LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY


    1. A011MQ8C01
      *a

      Component without harness connected

      (Luggage Door Opening Cancel Switch Assembly)

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (B) - 1 (L) Switch off (Not pressed) 10 kΩ or higher
        Switch on (Pressed) Below 1 Ω

        If the result is not as specified, replace the luggage door opening cancel switch assembly.