LUGGAGE COMPARTMENT DOOR ADJUSTMENT

CAUTION / NOTICE / HINT

B003XXUC02
*a Centering Bolt
*b Standard Bolt

Tech Tips


  • Centering bolts are used to mount the door hinge to the door. The door cannot be adjusted with the centering bolts installed. Substitute the centering bolts with standard bolts when making adjustments.

  • Specified torque for standard bolts is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSPECT LUGGAGE COMPARTMENT DOOR


    1. Check that the clearance measurements of areas a through d are within each standard range.

      B003YJ8N04
      Standard Clearance
      Area Measurement Area Measurement
      a 7.9 mm (0.311 in.) b 2.3 to 5.3 mm (0.0906 to 0.209 in.)
      c -1.4 to 1.6 mm (-0.0551 to 0.0630 in.) d 4.0 to 8.0 mm (0.157 to 0.315 in.)

  2. REMOVE LUGGAGE COMPARTMENT DOOR COVER

    Click here

  3. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  4. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

  5. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  6. REMOVE LUGGAGE COMPARTMENT TRIM BOX

    Click here

  7. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  8. ADJUST LUGGAGE COMPARTMENT DOOR


    1. B003YON

      Loosen the door side hinge bolts to adjust the door horizontally and vertically.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    2. B003XUF

      Using a T40 "TORX" socket wrench, slightly loosen the striker mounting screws.

    3. Using a brass bar and a hammer, hit the striker to adjust its position.

    4. Using a T40 "TORX" socket wrench, tighten the striker mounting screws after adjustment.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }

  9. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

  10. INSTALL LUGGAGE COMPARTMENT TRIM BOX

    Click here

  11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  12. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

  13. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  14. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here