STEERING COLUMN ASSEMBLY REASSEMBLY

PROCEDURE


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic Steering Column)


    1. Install the multiplex tilt and telescopic ECU with the 2 screws.

  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column)

    Tech Tips

    When replacing the steering lock actuator assembly, refer to the service bulletin.


    1. Set the steering column assembly in a vise between aluminum plates.

      Note

      Do not overtighten the vise.

    2. A011QCX

      Temporarily install the steering lock actuator assembly with a new steering lock set bolt.

    3. Tighten the steering lock set bolt until the bolt head breaks off.

  3. INSTALL STEERING LOCK ACTUATOR ASSEMBLY (for Power Tilt and Power Telescopic Steering Column)

    Tech Tips

    When replacing the steering lock actuator assembly, refer to the service bulletin.


    1. A011OC1

      Temporarily install the steering lock actuator assembly with 2 new steering lock set bolts.

    2. Tighten the 2 steering lock set bolts until the bolt head breaks off.