STEERING LOCK SYSTEM SYSTEM DIAGRAM

A011O04E03
Circuit Description
Component Outline
Steering Lock ECU (Steering Lock Actuator Assembly)

  • The steering is locked and unlocked by communicating with the certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU) via LIN communication.


  • When the following conditions are met, the steering can be unlocked.


    • The codes (L codes) of the ID code box (immobiliser code ECU) and steering lock match.

    • The codes (S codes) of the ID code box (immobiliser code ECU) and certification ECU (smart key ECU assembly) match.

    • The certification ECU (smart key ECU assembly) and key ID codes match.
Certification ECU (Smart Key ECU Assembly)

  • The ID code of the key the user is carrying is sent to the electrical key antenna.

  • The certification ECU (smart key ECU assembly) compares the key ID code it receives from the electrical key antenna with its own ID code. If they match, the certification ECU (smart key ECU assembly) permits the steering lock ECU (steering lock actuator assembly) to turn the power on, start the hybrid control system and unlock and lock the steering.
ID Code Box (Immobiliser Code ECU) Receives immobiliser set and unset commands from the certification ECU (smart key ECU assembly) via LIN communication and sends them to the power management control ECU.
Power Management Control ECU Permits the steering lock ECU to supply power to activate the motor. The power management control ECU and certification ECU (smart key ECU assembly) permit hybrid control system start after receiving an unlock signal from the steering lock ECU.