BRAKE STROKE SIMULATOR CYLINDER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LHD and RHD.

  • The following procedure is for the LHD.

PROCEDURE


  1. INSTALL BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY


    1. Install the brake stroke simulator cylinder sub-assembly to the brake master cylinder sub-assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL BRAKE STROKE SIMULATOR TUBE


    1. Using a union nut wrench, install the brake stroke simulator tube to the brake stroke simulator cylinder sub-assembly and brake master cylinder sub-assembly.

      Torque:
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Note


      • Do not kink or damage the brake stroke simulator tube.

      • Do not allow any foreign matter such as dirt or dust to enter the brake stroke simulator tube from the connecting parts.

      • Use the formula to calculate special torque values for situations where the union nut wrench is combined with a torque wrench.

        Click here

  3. INSTALL BRAKE MASTER WITH STROKE SIMULATOR CYLINDER ASSEMBLY

    for LHD: Click here

    for RHD: Click here