Click here

BRAKE MASTER CYLINDER(for LHD) DISASSEMBLY

Click here
Click here

PROCEDURE


  1. Click here

    REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS


    1. A011OW7

      Loosen the clevis lock nut and remove the brake master cylinder push rod clevis and clevis lock nut from the brake master cylinder sub-assembly.

  2. Click here

    REMOVE BRAKE MASTER CYLINDER RING PIN


    1. Mount the brake master cylinder sub-assembly in a vise.

      Note:

      Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

    2. A011MD5

      Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.

      Note:

      Do not drop the brake master cylinder reservoir assembly.

  3. Click here

    REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY


    1. Remove the brake master cylinder reservoir assembly from the brake master cylinder assembly.

    2. Remove the brake master cylinder assembly from the vise.

  4. Click here

    REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. A011OEG

      Remove the 2 master cylinder reservoir grommets from the brake master cylinder assembly.

  5. Click here

    REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

  6. Click here

    REMOVE BRAKE FLUID INFORMATION LABEL

  7. Click here

    REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER