BRAKE MASTER CYLINDER(for LHD) COMPONENTS
ILLUSTRATION
| *1 | SKID CONTROL ECU ASSEMBLY | *2 | CONNECTOR |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | BRAKE ACTUATOR WITH BRACKET | *2 | NO. 1 RESERVOIR HOSE |
| *3 | NO. 3 ENGINE ROOM RELAY BLOCK | *4 | SKID CONTROL ECU BRACKET ASSEMBLY |
| *5 | BRAKE LINE | *6 | CONNECTOR |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | BRAKE BOOSTER GASKET | *2 | BRAKE MASTER WITH STROKE SIMULATOR CYLINDER ASSEMBLY |
| *3 | BRAKE PEDAL RETURN SPRING | *4 | NO. 1 RESERVOIR HOSE |
| *5 | PUSH ROD PIN | *6 | NO. 1 BRAKE ACTUATOR TUBE |
| *7 | NO. 2 BRAKE ACTUATOR TUBE | *8 | WIRE HARNESS |
| *9 | WIRE HARNESS CLAMP BRACKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Lithium soap base glycol grease | - | - |
ILLUSTRATION
| *1 | BRAKE MASTER CYLINDER SUB-ASSEMBLY | *2 | BRAKE STROKE SIMULATOR TUBE |
| *3 | BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *1 | BRAKE FLUID INFORMATION LABEL | *2 | BRAKE MASTER CYLINDER PUSH ROD CLEVIS |
| *3 | BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY | *4 | BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY |
| *5 | BRAKE MASTER CYLINDER RESERVOIR STRAINER | *6 | BRAKE MASTER CYLINDER RING PIN |
| *7 | MASTER CYLINDER RESERVOIR GROMMET | *8 | CLEVIS LOCK NUT |
| *9 | BRAKE MASTER CYLINDER ASSEMBLY | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| |
Lithium soap base glycol grease | - | - |