Click here

BRAKE PEDAL STROKE SENSOR(for RHD) REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

Note:

While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch turns on. Therefore, when servicing the brake system components, do not operate the brake pedal or open/close the doors while the auxiliary battery is connected.

Click here

PROCEDURE


  1. Click here

    REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Tip:

    Use the same procedure as for LHD.

    Click here

  2. Click here

    REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    1. A0021E7

      Disconnect the connector from the brake pedal stroke sensor assembly.

    2. A00230U

      Remove the 2 nuts and brake pedal stroke sensor assembly from the brake pedal support assembly.

      Tip:

      • Do not drop the brake pedal stroke sensor assembly.

      • If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.