ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:36, 43

DTC Code DTC Name
36 ABS Control System Malfunction
43 ABS Control System Malfunction

DESCRIPTION

These DTCs are stored if the VSC and/or electronically controlled brake system detects a malfunction in the ABS control system.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
36 ABS Control System Malfunction - Malfunction in the ABS control system. ABS control system Electronically controlled brake system DTC
43 ABS Control System Malfunction - Malfunction in the ABS control system. ABS control system VSC DTC

CAUTION / NOTICE / HINT

Note

When replacing the skid control ECU assembly, perform initialization and calibration of the linear solenoid valve.

Click here

PROCEDURE


  1. CHECK ABS CONTROL SYSTEM


    1. Clear the DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Clear DTCs

    2. Turn the power switch on (READY).

    3. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

    4. Check if ABS control system DTCs are output.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      ABS control system DTCs are not output. A
      ABS control system DTCs are output. B

    B

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCS Click here

    A

  2. RECONFIRM DTC


    1. Turn the power switch off.

    2. Clear the DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Clear DTCs

    3. Turn the power switch on (READY).

    4. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

    5. Check if the same DTC is output.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      DTCs 36 and 43 are not output. A
      DTCs 36 and/or 43 are output. B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE SKID CONTROL ECU ASSEMBLY for LHD: Click here
    REPLACE SKID CONTROL ECU ASSEMBLY for RHD: Click here