TIRE PRESSURE WARNING INITIATOR(for Rear Side) REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL LH

  2. REMOVE BATTERY SERVICE HOLE COVER LH

    Click here

  3. REMOVE JACK ASSEMBLY

  4. REMOVE REAR TIRE PRESSURE MONITOR INITIATOR


    1. B003Y42

      Disconnect the connector.

    2. Pull back the rear wheel house liner LH so that the rear tire pressure monitor initiator can be removed.

    3. B003Y83C01
      *a Grommet

      Disengage the grommet.

    4. Remove the 2 nuts and rear tire pressure monitor initiator.