TIRE PRESSURE WARNING INITIATOR(for Front Side) INSTALLATION

PROCEDURE

1. INSTALL FRONT TIRE PRESSURE MONITOR INITIATOR

   
   

   1. Connect the connector to the front tire pressure monitor initiator.

   2. Engage the hook to temporarily install the front tire pressure monitor initiator.

   3. Install the front tire pressure monitor initiator with the nut.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   4. Install the front fender liner LH to its original position.

2. INSTALL FRONT WHEEL LH

   Torque:

   103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

3. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here