TIRE PRESSURE WARNING RECEIVER REMOVAL

PROCEDURE

1. PRECAUTION (w/ Rear Seat Side Airbag)

   CAUTION:

   Be sure to read Precaution thoroughly before servicing.

   Click here

   Note

   After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

   Click here

2. REMOVE BATTERY SERVICE HOLE COVER LH (w/ Rear Seat Side Airbag)

   Click here

3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Rear Seat Side Airbag)

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

   Note

   When disconnecting the cable from the negative (-) auxiliary battery terminal, some systems need to be initialized after the cable is reconnected.

   Click here

4. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)

   Click here

5. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

   Click here

6. REMOVE REAR SEAT CUSHION LOCK HOOK

   Click here

7. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for Fold Down Seat Type)

   Tech Tips

   Use the same procedure as for the RH side.

   Click here

8. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

9. REMOVE REAR SEAT SIDE GARNISH LH

   Click here

10. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

    Click here

11. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

    
    

    1. 

       Remove the bolt.

    2. Disengage the 2 hooks to remove the tire pressure warning ECU and receiver.

    3. Disconnect the connector from the tire pressure warning ECU and receiver.