TIRE PRESSURE WARNING INITIATOR DRIVER INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER

   
   

   1. Connect the connector to the tire pressure monitor initiator driver.

   2. Install the tire pressure monitor initiator driver with the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

   Click here

4. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

5. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

6. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here