FRONT SUSPENSION MEMBER REMOVAL

PROCEDURE


  1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

    Click here

  2. REMOVE FRONT ENGINE MOUNTING INSULATOR

    Click here

  3. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH


    1. Remove the engine under cover sub-assembly LH.

  4. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  5. REMOVE FRONT STABILIZER BAR


    1. A01MSCB

      Remove the 2 nuts and front stabilizer bar.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud bolt.

  6. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY LH


    1. A01MT5E

      Remove the 2 bolts, 2 nuts and washer, and separate the front lower suspension arm assembly LH.

  7. SEPARATE FRONT LOWER SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  8. REMOVE POWER STEERING LINK ASSEMBLY


    1. A01MRK3

      Remove the 2 bolts, 2 nuts, 2 washers, 2 front suspension member brace plates and power steering link assembly from the front suspension crossmember sub-assembly.

      Tech Tips

      Remove the power steering link assembly together with the front lower suspension arm assembly LH and front lower suspension arm assembly RH.